Evomer Fast Primer
Polymer-bituminous PRIMER for preparation of roof surface before installation of roofing and waterproofing materials.
- dries only 20 minutes
- safe for polystyrene
- highly efficient – even 120 m2 from 18 kg bucket
Roof coatings are particularly sensitive parts of buildings which are often exposed to the risk of leakage. When leakages occur, they should be fixed within shortest possible time to avoid further damage to the building’s interior. Time is a key element here for both the investor and the contractor.
EVOMER is the new generation of polymer-bituminous compounds developed to ensure the shortest possible time of roof repair. Evomer is solvent-free, which makes it safe to use but also considerably shortens the drying time of each coat.
even 36x faster than solvent-based solution
complete system for flat roof renovations
odourless
non-flammable
safe for polystyrene
color | brown, black when cured |
consistency | liquid |
application tool | roller |
application temperature | from +5°C to +35°C |
storage temperature | from +5°C to +30°C |
curing time | 20 min. |
consumption | up to 120 m2 (from 18kg bucket) |
elasticity in low temperature | up tp -20oC |
vertical flow resistance in increased temperature | up to 90oC |
application temperature | from +5°C to +35°C |
storage temperature | from +5°C to +30°C |
good adhesion to | bituminous shingles, clinker tile, brick, concrete, galvanized sheet, stainless steel, aluminum, raw wood, EPS, XPS, OSB board. |
Dense bitumen-polymer mastic designed for filling damages and cracks in roof coverings. Due to strong adhesive properties can be also used for bonding thermal insulation panels.
color | brown, black when cured |
consistency | dense mass |
application tool | spatula |
application temperature | from +5°C to +30°C |
storage temperature | from +5°C to +30°C |
curing time | 2h (resistant to rain) |
consumption | up to 4 m2 (from 5kg bucket; single layer application) |
elasticity in low temperature | up to -20oC |
vertical flow resistance in increased temperature | up to 90oC |
good adhesion to | bituminous shingles, brick, concrete, galvanized sheet, EPS, XPS, OSB board |
color | brown, black when cured |
consistency | dense liquid |
application tool | brush |
application temperature | from +5°C to +35°C |
storage temperature | from +5°C to +30°C |
curing time | 2h (resistant to rain) |
consumption | up to 50 m2 (from 18kg bucket; single layer application) |
elasticity in low temperature | up to -20oC |
vertical flow resistance in increased temperature | up to 90oC |
good adhesion to | bituminous shingles, unglazed clinker roof tile, brick, concrete, galvanized sheet, stainless steel, aluminum, raw wood, EPS, XPS, OSB board |
Мы уважаем вашу личную информацию, поэтому хотим сообщить вам, что мы обновили нашу Политику конфиденциальности. Для того, чтобы предоставить четкую и прозрачную информацию о том, как мы обрабатываем ваши личные данные. В каждом разделе мы подробно описываем, какие личные данные у нас есть и как мы их используем. Мы также добавили информацию о ваших правах, например, как вы можете получить доступ к своим данным и отказаться от их использования.